•  

Economical Power Pack Magnetic Current Generators

P-Series portable power packs are convenient and economical inspection units that are used in a wide range of magnetic particle inspection applications that require only moderate power.

These portable electromagntic current generators are ideal for inspecting large or heavy parts, in-service mobile equipment or job-site weld testing with magnetic particle inspection NDT method.

P-Series power packs are availble in two configurations P-70 and P-1500 to meet a variety of mag particle inspection needs. Click on the tabs below for more details on these configurations.

Benefits

  • Find surface defects with AC current; switch cable connection to half wave DC (HWDC) for near-surface flaws
  • Locate defects in any direction using prods, central conductor, coil (wrap part with 3-5 turns of cable)
  • Infinitely variable current control
  • Demagnetize parts in AC mode by slowly turning the current dial to zero
  • Built-in automatic-reset circuit breaker
  • May be used as the main power source for the Mag Kit modular bench inspection system
  • Comes standard with 15 ft / 4.5 m remote control cable

Comparison

 

 

P-70

P-1500

Contact Current Capacity (amps)* AC 750 1,500
HWDC  750 1,500
Dimensions 17.5 x 9 x 7.5 in /
44.5 x 23 x 19 cm
22 x 9.5 x 9.5 in /
56 x 24 x 24 cm
Weight 35 lb / 16 kg 93 lb / 42 kg

* Rated with 2 sets of 15 ft / 4.6 m of 4/0 cable

  • P-70 
  • P-1500 

P-70

Specifications

  • Length: 17.5" (44.5 cm)
  • Width: 9" (22.9 cm)
  • Height: 8" (20.3 cm)
  • Maximum Output*: 750 amps, AC or HWDC
  • Available Voltages: 115,230, 50 or 60 Hertz; single phase power
  • Line Current: 26 amps @ 115 VAC; 13 amps @ 230 VAC
  • Maximum Duty Cycle: 2 minutes ON, 2 minutes OFF
  • Unit Weight: 35 lbs (15.9 kg)

Note: Current ratings are based on the use of two 15-foot length 4/0 cable, 4/0 cable not included, must be purchased separately. 

 

Part Numbers

P-70, 115V     190575

P-70, 230V     190575-01


Request a Quote
 

Product Data Sheet

P-1500

Specifications

  • Length: 22" (55.9 cm)
  • Width: 9.5" (24.1 cm)
  • Height: 9.5" (24.1 cm)
  • Maximum Output: 1500 amps, AC or HWDC
  • Available Voltages: 230,460, 50 or 60 Hertz; single phase power
  • Line Current: 42 amps @ 230 VAC; 21 amps @ 460 VAC
  • Maximum Duty Cycle: 2 minutes ON, 2 minutes OFF
  • Unit Weight: 93 lbs (42.2 kg)

Note: Current ratings are based on the use of two 15-foot length 4/0 cable, 4/0 cable not included, must be purchased separately. 

 

Part Numbers

P-1500, 230V     198500

P-1500, 460V     198500-01


Request a Quote
 

Product Data Sheet

Please wait while we gather your results.

Related Products

Magnetic Particle Consumables

磁粉检测化学品

适用于磁粉检测的化学品。

Magnaflux Magnetic Particle Testing Cables Connectors

电缆和接头

用于磁粉检测设备电缆和接头

触头组和连接夹头

触头法磁粉检测的触头组,与电源箱配合使用

磁场指示器

测试磁场强度和方向用指示器

Magnaflux

美国磁通上海办事处
上海市闵行区浦江镇漕河泾开发区新骏环路88号13A二楼
电话:+86 4000 686 980
传真:+86 21 5428 2675
​infochina@magnaflux.com

Select Your Country North America Mexico Brazil China Europe Russia India New Zealand, Australia, Japan, Southeast Asia
Copyright © 2012-2018依工特种材料(苏州)有限公司. All rights reserved.
top