•  

Power Pack Electromagnetic Current Generators with 3-Phase FWDC Magnetization

The CD-Series is our line of magnetic power packs for magnetic particle inspection.

These stationary magnetizing current generators are power pack versions of our wet bench units to effectively magnetize parts while keeping power requirements to a minimum.

CD-Series units are ideal for large parts which will not fit easily on a wet bench or for parts that require special handling.

CD-Series power packs are available in two configurations: CD-2100 and CD-2100HV. Click on the tabs below for more details on these configurations.

Benefits

  • Most economical way to create a high magnetizing current with minimal power requirements
  • For parts too large for traditional wet horizontal units or parts that need special handlin

Features

Exterior

  • Current Assurance Indicator
  • Large, easy to read Digital Ammeter Display
  • Sturdy Flat top, use as a convenient work surface
  • Ergonomic Display and Control Panel
  • Remote Mag Receptacle (Use with ZB-100FMB)
  • Dual 115 volt Accessory Outlets

Interior

  • PLC control advanced technology; reduce components and increase reliability
  • Modular digital solid state circuitry
  • Quick Break Circuitry
  • Liquid Resistant panels, allow ventilation while inhibiting fluid intrusion

Compare CD-Series units with our Stationary Power Pack Equipment Comparison chart.

  • CD-2100 
  • CD-2100HV 

CD-2100

Specifications

  • 10,000 amp 3-phase rectified to FWDC output
  • Duty Cycle 0.5 seconds on, 20 Seconds off (2.5% with Maximum of 5 seconds)
  • Ultra Low Frequency reversing DC Demagnetization
  • Available Voltages: 230, 380, 415, 460, 575, 50 or 60 hertz, three phase power
  • Minimum 80 PSI with 5 SCFM capability
  • 60” (153 cm) x 31” (79 cm) Foot Print, allow 24” (61 cm) per side for ventilation
  • Pulsed Output (1/2 sec ON – 1 sec OFF for 10 cycles)

Optional Features

  • NRTL Certification to CSA C22.2 No. 61010-1


Request a Quote
 

Product Data Sheet

CD-2100HV

Specifications

  • 10,000 amp 3-phase FWDC current output
  • Duty Cycle 0.5 seconds on, 10 Seconds off (5% with Maximum of 5 seconds)
  • Ultra Low Frequency reversing DC Demagnetization
  • Available Voltages: 230, 380, 415, 460, 575, 50 or 60 hertz, three phase power
  • Minimum 80 PSI with 5 SCFM capability
  • 60” (153 cm) x 31” (79 cm) Foot Print, allow 24” (61 cm) per side for ventilation
  • Pulsed Output (1/2 sec ON – 1 sec OFF for 10 cycles)

Optional Features

  • NRTL Certification to CSA C22.2 No. 61010-1


Request a Quote
 

Product Data Sheet

Please wait while we gather your results.

Related Products

Magnetic Particle Consumables

磁粉检测化学品

适用于磁粉检测的化学品。

Magnaflux Magnetic Particle Equipment Demagnetizer

Demagnetizers

For removing residual magnetism

Magnaflux Magnetic Particle Testing Cables Connectors

电缆和接头

用于磁粉检测设备电缆和接头

触头组和连接夹头

触头法磁粉检测的触头组,与电源箱配合使用

磁场指示器

测试磁场强度和方向用指示器

磁悬液施加工具

磁悬液施加工具

磁粉检测用仪表

磁粉检测用仪表

Magnaflux

美国磁通上海办事处
上海市闵行区浦江镇漕河泾开发区新骏环路88号13A二楼
电话:+86 4000 686 980
传真:+86 21 5428 2675
​infochina@magnaflux.com

Select Your Country North America Mexico Brazil China Europe Russia India New Zealand, Australia, Japan, Southeast Asia
Copyright © 2012-2018依工特种材料(苏州)有限公司. All rights reserved.
top