•  

Multi-Directional Magnetic Benches for AC, HWDC or 1-Phase FWDC Magnetization

The MD-Series multi-directional magnetic benches are our most versatile line of magnetic benches.

These magnetic particle inspection benches offers time saving multidirectional magnetization for finding defects in all orientations with one cycle.

The two or three outputs are independently adjust to balance the magnet field intensity. Each output offers AC, HWDC or 1-Phase FWDC output.

MD-Series magnetic benches are available in three configurations: MD-2030, MD-2060 and MD3-2060 Click on the tabs below for more details on these configurations.

Compare MD-Series units with our Wet Bench Magnetic Particle Equipment Comparison.

Features

Exterior

  • Innovative pump system for fluid delivery, agitation with easy maintenance access
  • Push bar design for easy activation
  • Visual/audible current assurance alarms with alarm log
  • Large, easy to read digital ammeter displays
  • Independent variable current controls with keypad entry
  • Independent Contact, Flux Flow Current Type Selection
  • Daily reminder alarms for UV light, visible light and bath concentration
  • 50 customer programmable recipes
  • Color Touch Screen Interface
  • Automatic piece parts counter
  • Footswitch-activated pneumatic headstock
  • Adjustable tailstock with crank
  • Stainless steel tank
  • Front and rear maple hardwood grilles

Interior

  • PLC control advanced technology; reduce components and increase reliability
  • Modular digital solid state circuitry
  • Quick disconnect wiring
  • Liquid Resistant panels, allow ventilation while inhibiting fluid intrusion

Learn how the Database System upgrade for wet bench MPI equipment can improve NDT quality control and inspection productivity with a MD-Series machine.

  • MD-2030 
  • MD-2060 
  • MD3-2060 

MD-2030

Specifications

  • 3,000 amp FWDC / HWDC or 2,500 amp AC multidirectional output; current capability at contacts
  • Multidirectional power supply-two outputs (Contacts, Flux-Flow coils)
  • Duty cycle 0.5 seconds on, 10 seconds off (5% with maximum of 2 seconds)
  • Off time between magnetizing shots increases for shot time set above 0.5 seconds to maintain 5% duty cycle
  • 41 inch (104 cm) headstock/tailstock capacity
  • Two Independently variable current controls
  • Recommended 20 Gallon (75 Liter) Tank Fluid Capacity
  • Available Voltages: 230, 380, 415, 460, 575, 50 or 60 hertz, 3 phase power
  • Minimum 80 PSI with 5 SCFM capability
  • 89” (226cm) x 41” (104 cm) Foot Print, allow 24”(61 cm) per side for ventilation

Optional Features

  • Rapid Reversing FWDC or decaying AC Demagnetization
  • 16 in Coil (40 cm) in lieu of the Flux Flow Coils
  • Dual Palm Button in lieu of Footswitch

Automatic Bath

  • Engage/Disengage switch
  • Adjustable Stroke Length, up to 22 inches
  • Automatic Mag Shot when Bath Returns
  • Automatic Bath Shut Off, no flow when bath in retracted position
  • Articulating Spray Nozzles


Request a Quote
 

Product Data Sheet

MD-2060

Specifications

  • 6,000 amp FWDC / HWDC or 5,000 amp AC multidirectional output; current capability at contacts
  • Multidirectional power supply-two outputs (Contacts,, Flux-Flow coils)
  • Rapid Reversing FWDC or decaying AC Demagnetization
  • Duty cycle 0.5 seconds on, 10 seconds off (5% with maximum of 2 seconds)
  • Off time between magnetizing shots increases for shot time set above 0.5 seconds to maintain 5% duty cycle
  • 41 inch (104 cm) headstock/tailstock capacity
  • Recommended 20 Gallon (75 Liter) Tank Fluid Capacity
  • Available Voltages: 380, 415, 460, 575, 50 or 60 hertz, 3 phase power
  • Minimum 80 PSI with 5 SCFM capability
  • 89” (226 cm) x 41” (104 cm) Foot Print, allow 24” (61 cm) per side for ventilation

Optional Features

  • Rapid Reversing FWDC or decaying AC Demagnetization
  • 16" Coil (40 cm) in lieu of the Flux Flow Coils
  • Dual Palm Button in lieu of Footswitch

Automatic Bath

  • Engage/Disengage switch
  • Adjustable Stroke Length, up to 22 inches
  • Automatic Mag Shot when Bath Returns
  • Automatic Bath Shut Off, no flow when bath in retracted position
  • Articulating Spray Nozzles

Configure Unit for 89” Part Capacity

  • Recommended 32 Gallon (122 L) Tank Fluid Capacity
  • 136” (346 cm) x 41” (104 cm) Foot Print, allow 24”(61 cm) per side for ventilation


Request a Quote
 

Product Data Sheet

MD3-2060

Specifications

  • 6,000 amp FWDC / HWDC or 5,000 amp AC multidirectional output; current capability at contacts
  • Multidirectional power supply - three outputs (Contacts, Flux-Flow coils, & Aux Coil)
  • Duty cycle 0.5 seconds on, 10 seconds off (5% with maximum of 2 seconds)
  • Off time between magnetizing shots increases for shot time set above 0.5 seconds to maintain 5% duty cycle
  • 41 inch (104 cm) headstock/tailstock capacity
  • Three Independently variable current controls
  • Recommended 20 Gallon (75 Liter) Tank Fluid Capacity
  • Available Voltages: 380, 415, 460, 575, 50 or 60 hertz, 3 phase power
  • Minimum 80 PSI with 5 SCFM capability
  • 89” (226 cm) x 41” (104 cm) Foot Print, allow 24” (61 cm) per side for ventilation

Optional Features

  • Rapid Reversing FWDC or decaying AC Demagnetization
  • 20 inch (51 cm) Coil in lieu of the 16" Coil
  • 19.5 inch (50 cm) clam-shell coil (3-turn) w/raising block up-grade (in lieu of 16" coil)
  • Dual Palm Button in lieu of Footswitch

Automatic Bath (22" Stroke)

  • Engage/Disengage Switch
  • Adjustable Stroke Length, up to 22 inches
  • Automatic Mag Shot when Bath Returns
  • Automatic Bath Shut Off, no flow when bath in retracted position
  • Articulating Spray Nozzles

Configure Unit for 89" Part

  • Recommended 32 Gallon (122 L) Tank Fluid Capacity
  • 136" (346 cm) x 41" (104 cm) Foot Print, allow 24" (61 cm) per side for ventilation

Configure Unit for 133" Part

  • Recommended 55 Gallon (209 L) Tank Fluid Capacity
  • 180" (458 cm) x 41" (104 cm) Foot Print, allow 24" (61 cm) per side for ventilation 


Request a Quote
 

Product Data Sheet

Please wait while we gather your results.

Related Products

Magnetic Particle Consumables

磁粉检测化学品

适用于磁粉检测的化学品。

Magnaflux Magnetic Particle Equipment Demagnetizer

Demagnetizers

For removing residual magnetism

Magnaflux Magnetic Particle Equipment Enclosure

Enclosures

To darken the inspection area during fluorescent mag particle testing

Magnaflux Magnetic Particle Testing Cables Connectors

电缆和接头

用于磁粉检测设备电缆和接头

Magnaflux Magnetic Particle Inspection Contact Pads

接触垫片

磁粉检测设备用铜网垫片和铅垫片

Magnaflux Mag Particle Inspection Equipment Adapters

设备适配类附件

设备适配类附件

Magnaflux Magnetic Particle Testing Equipment Coils

磁化线圈

适用于卧式磁探机

触头组和连接夹头

触头法磁粉检测的触头组,与电源箱配合使用

Magnaflux

美国磁通上海办事处
上海市闵行区浦江镇漕河泾开发区新骏环路88号13A二楼
电话:+86 4000 686 980
传真:+86 21 5428 2675
​infochina@magnaflux.com

Select Your Country North America Mexico Brazil China Europe Russia India New Zealand, Australia, Japan, Southeast Asia
Copyright © 2012-2018依工特种材料(苏州)有限公司. All rights reserved.
top