•  

Magnetic Benches with AC/DC Magnetization

The A-Series is our most economical line of wet magnetic bench units.

These magnetic benches for wet method magnetic particle inspection offer great part mobility for finding surface and sub-surface defects, and most units have the versatility of using AC or DC magnetization.

The two outputs are independently adjustable to set each magnetic field, circular or longitudinal.

Magnetization shot time is adjustable, allowing better development of indications. 

A-Series magnetic benches are availble in three configurations: A-2030, AD-2045 and AHD-2045. Click on the tabs below for more details on these configurations.

Features

Exterior

  • Touch Screen Interface with standard and optional features
  • Current Type Selector
  • Adjustable Mag Shot Timer
  • Double Mag Shot
  • Innovative pump system for fluid delivery, agitation with easy maintenance access
  • Push bar design for easy activation
  • Current assurance indicator for magnetic current flow
  • Large, easy to read Digital Ammeter
  • Independent Contact and Coil Current Controls
  • 12 inch (30 cm) diameter coil
  • Footswitch-activated pneumatic headstock
  • Adjustable tailstock with crank
  • Stainless steel tank
  • Front and rear maple hardwood grilles

Interior

  • Microprocessor control advanced technology; reduce components and increase reliability
  • Solid state circuitry
  • Liquid Resistant panels, allow ventilation while inhibiting fluid intrusion

Learn how the Database System upgrade for wet bench MPI equipment can improve NDT quality control and inspection productivity with an A-Series machine.

  • A-2030 
  • AD-2045 
  • ADH-2045 

A- 2030

Specifications

  • 3,000 amp AC magnetizing current capability at contacts
  • Demag—One Touch decaying AC
  • Duty cycle 0.5 seconds on, 10 seconds off (5% with maximum of 2 seconds)
  • Off time between magnetizing shots increases for shot time set above 0.5 seconds to maintain 5% duty cycle
  • 54 inch (137 cm) headstock/tailstock capacity
  • Infinitely variable current control
  • Available Voltages: 230, 380, 415, 460, 575, 50 or 60 hertz, single phase power
  • Recommended 20 Gallon (75 Liter) Tank Fluid Capacity
  • Minimum 80 PSI with 5 SCFM capability
  • 89” (224 cm) x 41” (104 cm) Foot Print, allow 24” (61 cm) per side for ventilation

Optional Features

  • 16” coil (41 cm) w/raising block up-grade (In lieu of 12” coil)
  • Rotating Contacts (70 lb. part capacity; N/A w/12" coil or Auto-Bath; reduces part capacity by 9")
  • NRTL Certification to CSA C22.2 No. 61010-1
  • Dual Palm Button
  • Auto-Bath
    • Automatically applies magnetic particle bath to the part
    • Engage/Disengage switch
    • Adjustable stroke length up to 22 inches
    • Automatic mag shot after Auto-Bath
    • Automatic bath shut off, no flow when bath in retracted position
    • Articulating spray nozzles
  • Auto-Mag
    • Automatically clamps part, initiates magnetizing shot, then unclamps part
  • Pneumatic Tailstock
    • Lever for operator to push which moves the tailstock up and down the rail
    • Ratchet to manually lock down once in final position

Configure Unit for 102" Part Capacity

  • Recommended 32 Gallon (122 Liter) Tank Fluid Capacity
  • 136” (346 cm) x 41” (104 cm) Foot Print, allow 24” (61 cm) per side for ventilation

Configure Unit for 146" Part Capacity

  • Recommended 55 Gallon (209 Liter) Tank Fluid Capacity
  • 180" (458 cm) x 41" (104 cm) Foot Print, allow 24" (61 cm) per side for ventilation


Request a Quote
 

Product Data Sheet

AD- 2045

Specifications

  • 4,000 amp AC / 5,000 amp FWDC magnetizing current capability at contacts
  • Demag—One Touch decaying AC
  • Duty cycle 0.5 seconds on, 10 seconds off (5% with maximum of 2 seconds)
  • Off time between magnetizing shots increases for shot time set above 0.5 seconds to maintain 5% duty cycle
  • 54 inch (137 cm) headstock/tailstock capacity
  • Infinitely variable current control
  • Available Voltages: 230, 380, 415, 460, 575, 50 or 60 hertz, single phase power
  • Recommended 20 Gallon (75 Liter) Tank Fluid Capacity
  • Minimum 80 PSI with 5 SCFM capability
  • 89” (224 cm) x 41” (104 cm) Foot Print, allow 24” (61 cm) per side for ventilation

Optional Features

  • 16” coil (41 cm) w/raising block up-grade (In lieu of 12” coil)
  • 20” coil (51 cm) w/raising block up-grade (In lieu of 12” coil)
  • 19.5” inch (50 cm) clam-shell coil (3-turn) w/raising block up-grade (In lieu of 12” coil)
  • Reinforced Rail for heavier part load (4,000 lbs. part capacity)
  • Oversized Contact assembly (12”x 12”) for headstock & tailstock
  • Rotating Contacts (70 lb. part capacity; N/A w/12" coil or Auto-Bath; reduces part capacity by 9")
  • NRTL Certification to CSA C22.2 No. 61010-1
  • Dual Palm Button
  • Auto-Bath
    • Automatically applies magnetic particle bath to the part
    • Engage/Disengage switch
    • Adjustable stroke length up to 22 inches
    • Automatic mag shot after Auto-Bath
    • Automatic bath shut off, no flow when bath in retracted position
    • Articulating spray nozzles
  • Auto-Mag
    • Automatically clamps part, initiates magnetizing shot, then unclamps part
  • Pneumatic Tailstock
    • Lever for operator to push which moves the tailstock up and down the rail
    • Ratchet to manually lock down once in final position

Configure Unit for 102" Part Capacity

  • Recommended 32 Gallon (122 Liter) Tank Fluid Capacity
  • 136” (346 cm) x 41” (104 cm) Foot Print, allow 24” (61 cm) per side for ventilation

Configure Unit for 146" Part Capacity

  • Recommended 55 Gallon (209 Liter) Tank Fluid Capacity
  • 180" (458 cm) x 41" (104 cm) Foot Print, allow 24" (61 cm) per side for ventilation


Request a Quote
 

Product Data Sheet

ADH-2045

Specifications

  • 4,000 amp AC / 5,000 amp HWDC magnetizing current capability at contacts
  • Demag—One Touch decaying AC
  • Duty cycle 0.5 seconds on, 10 seconds off (5% with maximum of 2 seconds) 
  • Off time between magnetizing shots increases for shot time set above 0.5 seconds to maintain 5% duty cycle
  • 54 inch (137 cm) headstock/tailstock capacity
  • Infinitely variable current control
  • Available Voltages: 230, 380, 415, 460, 575, 50 or 60 hertz, single phase power
  • Recommended 20 Gallon (75 Liter) Tank Fluid Capacity
  • Minimum 80 PSI with 5 SCFM capability
  • 89” (224 cm) x 41” (104 cm) Foot Print, allow 24” (61 cm) per side for ventilation

Optional Features

  • 16” coil (41 cm) w/raising block up-grade (In lieu of 12” coil)
  • 20” coil (51 cm) w/raising block up-grade (In lieu of 12” coil)
  • 19.5” inch (50 cm) clam-shell coil (3-turn) w/raising block up-grade (In lieu of 12” coil)
  • Reinforced Rail for heavier part load (4,000 lbs. part capacity)
  • Oversized Contact assembly (12”x 12”) for headstock & tailstock
  • Rotating Contacts (70 lb. part capacity; N/A w/12" coil or Auto-Bath; reduces part capacity by 9")
  • NRTL Certification to CSA C22.2 No. 61010-1
  • Dual Palm Button
  • Auto-Bath
    • Automatically applies magnetic particle bath to the part
    • Engage/Disengage switch
    • Adjustable stroke length up to 22 inches
    • Automatic mag shot after Auto-Bath
    • Automatic bath shut off, no flow when bath in retracted position
    • Articulating spray nozzles
  • Auto-Mag
    • Automatically clamps part, initiates magnetizing shot, then unclamps part
  • Pneumatic Tailstock
    • Lever for operator to push which moves the tailstock up and down the rail
    • Ratchet to manually lock down once in final position 

Configure Unit for 102" Part Capacity

  • Recommended 32 Gallon (122 Liter) Tank Fluid Capacity
  • 136” (346 cm) x 41” (104 cm) Foot Print, allow 24” (61 cm) per side for ventilation

Configure Unit for 146" Part Capacity

  • Recommended 55 Gallon (209 Liter) Tank Fluid Capacity
  • 180" (458 cm) x 41" (104 cm) Foot Print, allow 24" (61 cm) per side for ventilation


Request a Quote
 

Product Data Sheet

Please wait while we gather your results.

Related Products

Magnetic Particle Consumables

磁粉检测化学品

适用于磁粉检测的化学品。

Magnaflux Magnetic Particle Equipment Demagnetizer

Demagnetizers

For removing residual magnetism

Magnaflux Magnetic Particle Equipment Enclosure

Enclosures

To darken the inspection area during fluorescent mag particle testing

Magnaflux Magnetic Particle Testing Cables Connectors

电缆和接头

用于磁粉检测设备电缆和接头

Magnaflux Magnetic Particle Inspection Contact Pads

接触垫片

磁粉检测设备用铜网垫片和铅垫片

Magnaflux Mag Particle Inspection Equipment Adapters

设备适配类附件

设备适配类附件

Magnaflux Magnetic Particle Testing Equipment Coils

磁化线圈

适用于卧式磁探机

触头组和连接夹头

触头法磁粉检测的触头组,与电源箱配合使用

Magnaflux

美国磁通上海办事处
上海市闵行区浦江镇漕河泾开发区新骏环路88号13A二楼
电话:+86 4000 686 980
传真:+86 21 5428 2675
​infochina@magnaflux.com

Select Your Country North America Mexico Brazil China Europe Russia India New Zealand, Australia, Japan, Southeast Asia
Copyright © 2012-2018依工特种材料(苏州)有限公司. All rights reserved.
top